Raineon Connector

MS27467T15B35P

Series I straight plug · Shell 15 · Insert 15-35 · 37 × size 22D pin · olive drab cadmium

Certificate of conformance includedTypical lead time 2–4 weeks

2–4 weeksstocked configurations24 hoursquotation turnaroundCoC includedbatch traceabilityMOQ 1 pcprototype friendly

Request a quote for MS27467T15B35P

We manufacture MS27467T15B35P to the dimensional and performance requirements of MIL-DTL-38999 and supply it as a drop-in equivalent. It fits the same panel cut-out, uses the same standard contacts, and is documented with a certificate of conformance and batch traceability. Typical lead time is 2–4 weeks for stocked configurations and 4–8 weeks for non-standard finishes, key positions or custom assemblies — instead of the 20–30 weeks common in the OEM channel.

Specifications

Part numberMS27467T15B35P
Connector styleSeries I straight plug — bayonet coupling, scoop-proof, EMI grounding fingers
Series / specificationMIL-DTL-38999 Series I, bayonet coupling
Part number breakdownMS27467 style · T = environment-resistant class with accessory thread · 15 = shell size · B = olive drab cadmium · 35 = insert arrangement · P = pin contacts
Shell size15 (designator D)
Insert arrangement15-35 per MIL-STD-1560
Contacts37 × size 22D
Contact typePin (male) contacts
Contact terminationCrimp, removable — SAE-AS39029 contacts
Contact current rating5 A per contact (size 22D)
Contact resistance≤ 12 mΩ (Ø0.76 mm) max
Service ratingService M
Test voltage1300 Vrms at sea level / 800 Vrms at 21,000 m
Insulation resistance≥ 5,000 MΩ at 500 VDC
Shell materialAluminum alloy — stainless steel (class K) and titanium alloy (class TA) shells available on request
Insulator materialThermosetting or thermoplastic
Seal materialSilicone rubber
Shell finishB — Olive drab cadmium over nickel (Series I class B)
Shell-to-shell continuity2.5 mΩ
Salt spray500 h
Operating temperature−65 °C to +175 °C
Mating cycles500 minimum
EMI / RFI360° grounding fingers, EMI/RFI shielded
Key positionN (normal)
Mating halfCompanion receptacle of the same series, shell size and arrangement
IntermateabilitySeries I shells do not intermate with MIL-DTL-38999 Series III. Insert arrangements and contact counts are identical.
Environment noteContains cadmium — confirm local environmental restrictions before specifying

Cross reference

ManufacturerEquivalent line
Amphenol AerospaceLJT / MS27467 series
ITT CannonKJL / MS27467 series
GlenairSeries I / II bayonet equivalents
ConesysMS27466 / MS27467 / MS27473

Brand names and part numbers are the property of their respective owners and are shown for cross-reference only. Raineon products are manufactured to the dimensional and performance requirements of the applicable military specification and are offered as drop-in equivalents — they are not OEM-branded or OEM-supplied product.

Typical applications

  • Legacy aircraft and rotorcraft platforms still on bayonet Series I / II interfaces
  • Avionics retrofits and obsolescence replacement
  • Ground support and test benches
  • Military vehicles and naval equipment

Frequently asked questions

Is this a genuine military-qualified part?

We manufacture to the dimensional and performance requirements of MIL-DTL-38999 Series I / II and supply it as a drop-in equivalent. We do not represent the part as QPL-listed or OEM-branded.

Does it intermate with Series III connectors?

No. Series I and Series II use bayonet coupling and will not intermate with Series III threaded shells. Insert arrangements and contact counts are identical, which is why these parts are a common replacement on legacy bayonet platforms.

What lead time can I expect?

Typically 2–4 weeks ex-works for stocked configurations, and 4–8 weeks for non-standard finishes or key positions.

What documentation is included?

Certificate of conformance, date code and batch traceability. Dimensional inspection report and material certification on request.

Can you supply the matching receptacle?

Yes — the mating half is listed on this page and ships from the same production batch, which keeps contact alignment and plating matched.

What is the minimum order quantity?

One piece for evaluation. Price breaks from 10, 50 and 100 pieces.

Related part numbers

Get a quotation

Send us the part number, quantity and required delivery date. We reply with price, lead time and available documentation within 24 hours — and we will confirm the mate against your drawing before the order is placed.

Request a quote for MS27467T15B35P

Email sales@raineonconnector.com  ·  WhatsApp +86 18551752661

Raineon Connector · Nanjing Raineon Electronic Technology Co., Ltd. · https://www.raineonconnector.com. Specifications are indicative and subject to confirmation against the applicable detail specification and the part-specific datasheet. Reference to OEM brand names is for cross-reference only and does not imply affiliation, endorsement or OEM supply. Cadmium-plated finishes should be checked against local environmental restrictions before specification.

INQUIRY