Raineon Connector

J30J-21ZKP

Receptacle with female socket contacts · 21 contacts · 1.27 mm pitch · fixed-end screw locking

Certificate of conformance includedTypical lead time 2–4 weeks

2–4 weeksstocked configurations24 hoursquotation turnaroundCoC includedbatch traceabilityMOQ 1 pcprototype friendly

Request a quote for J30J-21ZKP

We manufacture J30J-21ZKP to the dimensional and performance requirements of MIL-DTL-83513 and supply it as a drop-in equivalent. It fits the same panel cut-out, uses the same standard contacts, and is documented with a certificate of conformance and batch traceability. Typical lead time is 2–4 weeks for stocked configurations and 4–8 weeks for non-standard finishes, key positions or custom assemblies — instead of the 20–30 weeks common in the OEM channel.

Specifications

Part numberJ30J-21ZKP
SeriesJ30J micro-D / micro-rectangular
EquivalenceManufactured to GJB2446A, the Chinese standard equivalent to MIL-DTL-83513 (Micro-D)
HousingMetal shielded housing, construction equivalent to the MDM series
Contact pitch1.27 mm (0.050 in)
Contact grid1.27 mm × 2.54 mm
Contacts21 (the J30J family covers 9 to 144 contacts)
Contact typeElastic stranded pin contacts (positive contacts)
GenderFemale socket contacts
Lockingfixed-end screw locking
TerminationCrimp · solder cup · straight PCB · right-angle PCB (selected by suffix)
InsulatorThermosetting / thermoplastic
Contact materialCopper alloy, gold plated
Rated current3 A
Contact resistance≤ 10 mΩ
Insulation resistance≥ 5,000 MΩ at room temperature · ≥ 100 MΩ under humid conditions
Withstand voltage800 V
Operating temperature−55 °C to +125 °C
Vibration resistance10 to 2,000 Hz, 196 m/s²
Shock / acceleration resistance735 m/s²
Mechanical life500 mating cycles
Salt spray96 hours
Locking screw torque0.15 to 0.2 N·m (9 to 100 contacts) · 0.2 to 0.3 N·m (144 contacts)
Sealed versionsJ30JM gel-sealed (Q/21EJ61B) and glass-sintered seal (Q/21EJ1001)
Mounting hole spacingidentical to MIL-DTL-83513
Shell finishNickel (standard) · cadmium available as suffix G
Mating halfJ30J-21TJL — view page

Ratings above are the published J30J series values to GJB2446A. Request the part-specific datasheet for qualification and test data.

Cross reference

ManufacturerEquivalent line
ITT CannonMDM / MWDM / MDSM series
GlenairMicro-D metal-shell series
TE / otherMIL-DTL-83513 slash sheets

Brand names and part numbers are the property of their respective owners and are shown for cross-reference only. Raineon products are manufactured to the dimensional and performance requirements of the applicable military specification and are offered as drop-in equivalents — they are not OEM-branded or OEM-supplied product.

Mating half

J30J-21TJL
plug with pin contacts (21 positions)
Open the J30J-21TJL page →

Mating requires the same shell size and insert arrangement, opposite contact gender and the same key position. Finish class does not affect mating, but cadmium and nickel finishes are normally kept consistent across a mated pair for corrosion reasons.

Typical applications

  • Dense signal interfaces on airborne and spaceborne electronics
  • Board-to-cable and board-to-board runs where 1.27 mm pitch is required
  • UAV and missile seeker electronics
  • Medical, robotic and instrumentation equipment
  • Direct replacement of MDM / MWDM / 83513 layouts

Frequently asked questions

Is this a drop-in replacement for MIL-DTL-83513 / MDM connectors?

Yes. J30J uses the same 1.27 mm contact pitch and the same 1.27 mm × 2.54 mm grid. Mounting hole spacing matches the MIL-DTL-83513 metal-shell footprint — on 15, 21, 25 and 31 way sizes it is identical; on 9 way it differs by 0.1 mm (14.4 mm against 14.3 mm), which is absorbed by the mounting hardware.

Which part number do I need for a plug and socket pair?

The TJL suffix is the plug with male pin contacts and free-end screw locking; the ZKP suffix is the receptacle with female socket contacts and fixed-end locking. Order both from this page to keep plating and contact alignment matched.

What termination options are available?

Crimp, solder cup, straight PCB and right-angle PCB versions. The termination is selected by the suffix after the contact count.

What is the lead time?

Typically 2–4 weeks ex-works for stocked contact counts and terminations, and 4–8 weeks for custom assemblies.

Can you supply pre-wired assemblies?

Yes. We build harness assemblies to your drawing, including wire, crimping, labelling, sleeving and continuity testing.

What is the minimum order quantity?

One piece for prototypes. Price breaks from 10, 50 and 100 pieces.

Related part numbers

  • J30J-21TJL  plug with pin contacts (21 positions)
  • J30J-25TJL  plug with pin contacts (25 positions)
  • J30J-25ZKP  receptacle with socket contacts (25 positions)
  • J30J-15TJL  plug with pin contacts (15 positions)
  • J30J-15ZKP  receptacle with socket contacts (15 positions)
  • J30J-31TJL  plug with pin contacts (31 positions)

Get a quotation

Send us the part number, quantity and required delivery date. We reply with price, lead time and available documentation within 24 hours — and we will confirm the mate against your drawing before the order is placed.

Request a quote for J30J-21ZKP

Email sales@raineonconnector.com  ·  WhatsApp +86 18551752661

Raineon Connector · Nanjing Raineon Electronic Technology Co., Ltd. · https://www.raineonconnector.com. Specifications are indicative and subject to confirmation against the applicable detail specification and the part-specific datasheet. Reference to OEM brand names is for cross-reference only and does not imply affiliation, endorsement or OEM supply. Cadmium-plated finishes should be checked against local environmental restrictions before specification.

INQUIRY